How US Wholesale Buyers Select Durable Custom Cosmetic Boxes

Because heat and humidity, taken by themselves, are a test that a finish can’t be built for, it can still come undone in a hot trailer or on a stockroom shelf at the front of the truck, where it gets hit by the sun. Custom foundation boxes and lip gloss packaging are particularly vulnerable because both are often stored on the same truck or shelf with a product that is also heat-sensitive. How to conduct a simple climate cycle before a complete order, what the fold or rub test fails to cover and where it is most important. Empress Packaging is a custom foundation of custom cosmetic boxes for beauty brands in the USA.

What is the effect of heat and humidity on a finish?

It attacks the bond, not the board. If there are sufficient heat cycles and the adhesive under the lamination film softens and then re-hardens, there is the possibility that the film will lift at one of the edges of the panel or one of the corners. This can happen with foil, too, though it will begin at the boundary. There are more bonding surfaces that can break this way, such as luxury cosmetic packaging boxes with more layering, more foil and more types of finishing compared to the crease that fails under a fold test or the ink that scuffs under a rub test. A box can be a box that passes both of those and fails here.

What is the reason why this is more important for some products than others?

Some sturdy retail display boxes themselves are heat sensitive, and that’s a signal to read. A lip gloss ships and is displayed under conditions that are similar to those that are stressful for a box finish: a hot delivery truck in summer, a stock room with no control, and a shelf close to a front window. If the contents of the box need to be kept out of heat, then the box that surrounds them is exposed to the same conditions and should be investigated as well. Beauty print finishing that is selected for initial appearance should also be selected, not assumed, for its performance after a week of the real transit and storage environment.

What is a simple method for performing a climate cycle test?

Without a lab. After five cycles of alternating warm and cool (for example, four hours at about 100 degrees F and four hours at about 40, this is an example; agree on your own cycle with the plant), cycle a sample through the heat and cold process a few cycles. Run a sample through a heat and cold process a few times, say 4 hours at around 100 degrees F and 4 hours at around 40, this is an illustration, but agree a cycle with the plant. Not only check after each cycle, but also check all corners and edges of the panel for lifting laminate or foil. Divide 20 cosmetic print finishing in half, cycle one half, and leave the other half at room temperature as a control, and then compare the two side by side. The finish will let you know that there is a difference that you can feel or see at the edges.

FAQS

Q: Can a cheaper finish be expected to go out of a heat cycle test sooner?

A: Not necessarily. If a coating is applied that will not heat cycle, some lower-cost coatings will perform better than a heavier laminate because less surface area is being bonded. Do not assume which type of finish you’ll get; test the specific finish you want to order.

Q: May I ask for a cycled sample prior to running a full?

A: Physical proof is available before bulk production, and a small cycled batch can be requested in addition to that specifically to verify the durability of the finish in the situation of high temperature and humidity.

Q: How many cycles before I believe it?

A: There’s no universal number. Center on the ship’s and plant’s conditions and agree on a cycle count with the plant, then use this first test as a baseline to compare future tests to.

Get a free quote on custom cosmetic boxes.

Submitting your product line and typical shipping and storage conditions, Empress Packaging will provide a quote for custom cosmetic boxes wholesale that will have a finish that they believe will handle the heat and humidity your boxes will be exposed to. Call (888) 900-7629 or email query@empresspackaging.com for a free quote, or request one via empresspackaging.com.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top